Domain bitli.de kaufen?
Produkte zum Begriff Devices:
-
EarthQuaker Devices Plumes
Low bis Medium Gain Overdrive Effektpedal, Innovative Weiterentwicklung des legendären grünen Overdrive Pedals, 3 wählbare Clipping-Modi (Symmetrisch LED, Asymmetrisch Silizium, No Diode OpAmp Drive), Verbesserter Arbeitsbereich des Tone-Reglers, Harmoniert mit E-Gitarren, Bässen und Synthies, Geräuschlose relais-basierte Soft-Touch Schaltung funktioniert als Latching und Momentary Schalter,
Preis: 130.00 € | Versand*: 0.00 € -
WMD Devices Arcane Preamp
Der Arcane Preamp von WMD ist ein zweistufiges Booster/Fuzz Pedal mit Dreiband-Klangregelung. The WMD Arcane Preamp is a two channel true bypass pedal. The first channel is a medium gain boost that adds a little bit of sparkle and breaks up into a soft overdrive when hit hard. The right footswitch activates the high gain fuzz channel which is fed by the boost and can provide hot lead tones or maximally crunched fuzz. A three band tone stack allows you to sculpt the fuzz tone into just what you want. Click for sound samples. The Controls Left Stomp - This foot switch bypasses or activates the pedal. The Arcane Preamp is wired true bypass, so it won't affect your tone when disengaged. When engaged the blue LED on the left side will be lit. Right Stomp - This foot switch selects the channel. The indicator for the channel select is under the fuzz channel tone controls. The LED will be lit when fuzz channel is active. Boost Gain - The leftmost knob controls the gain of the boost channel. This will add a bit of sparkle and clean gain at medium levels. Crank it to get soft clipping and lots of volume. Boost Level - This controls the output of the boost channel, setting ratios of the gain and level will allow more gain and overdrive without too much level. Or medium gain and maxed level for a big clean boost. Fuzz Gain - When the fuzz channel is engaged, it follows the boost channel. This knob takes the output of the boost and adjusts the level going into the fuzz. This channel has a boatload of gain. Low to medium levels provide touch sensitive distortion, crank it much past half and it starts to crunch. The fuzz channel can provide killer sounding feedback. Bass, Mids, Treble - The amp style tone stack is broken into three bands. Use it to sculpt your fuzz tone. The treble control is very sensitive around the middle with a ton of variation in sound. Fuzz Level - Since the tone stack is all passive, the stack feeds a final amplifier which puts out a ton of level. Use this to level your fuzz tone with the boost tone or to drive your amp's input stage to hell. Battery & 9VDC jack - Use a standard 9V battery inside the pedal for many hours of life, or use a BOSS style power plug (center negative) to power the Arcane Preamp. Warranty - All WMD pedals are warranted against manufacturer defects for one year from date of purchase. Contact WMD if you have any problems. Manual - Click here for the manual. The Arcane Preamp has been reviewed by Premier guitar, check it out . Sound Samples
Preis: 209.00 € | Versand*: 0.00 € -
EarthQuaker Devices Levitation Reverb
Effekt-Typ: Reverb Bauart: Digital Mono/Stereo: Mono In, Mono Out Regler: Atmosphere, Decay, Mix, Tone Modes: Length (Short/Long) Schalter: Bypass, Mode Bypass Modus: True Bypass Lieferumfang: Netzteil optional Stromversorgung: 9VDC, Center negative Stromverbrauch: 50mA Batteriebetrieb: Batteriebetrieb möglich Batterie-Typ: 9V Block Gehäuseformat: Standard Abmessungen BxHxT (cm): 6,5 x 4,2 x 12,1 Produktionsland: Made in USA Length (Toggle): Broad stroke control for decay time. Shorter to left, longer to the rightDecay: Controls the length of the reverb decay. Longer clockwise, shorter counter clockwiseAtmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb (more atmosphere clockwise, less counter clockwise)Mix: This controls how much wet signal is blended in with the dry (more reverb clockwise, less counter cloc Introducing the Levitation reverb, a pedal designed by EarthQuaker Devices in conjunction with the LEVITATION music festival! LEVITATION, founded as Austin Psych Fest in 2008, has become a way to honor and preserve Austin’s psychedelic rock heritage, and carry it into the future. We wanted to remain true to the theme ofLEVITATION and decided to do a variation on our popular Ghost Echo pedal to honor the reverb-drenched tones synonymous with classic psych rock. The Levitation Reverb builds on the base sound found in the Ghost Echo but does away with the attack and dwell and adds control over tone, decay, atmosphere and length in their place. It is a vintage voiced reverb that aims to fit somewhere between dirty sixties chambers, classic spring, and the big, ringing plate reverbs of days gone by. Four knobs and one switch control quite a bit more than you’d expect. Want a slap back small room sound? Set all of your controls to the minimum and use the mix to dial in the sound of room devoid of anything but a guitar and amp. Want to revel in infinite spatial oscillations? Flip the toggle to long, turn up the atmosphere and decay then tune out. Dial in a bright chiming slap back by turning the tone all the way counter clockwise and reducing the decay. For a rattling, full-bandwidth assault, dime everything and let ‘er rip. Each Levitation Reverb is built entirely by hand in Akron, Ohio by EarthQuaker Devices. It will be officially released at LEVITATION on May 8th, 2015 and available at the merchandise booth all weekend. More about LEVITATION Controls Length (Toggle): Broad stroke control for decay time. Shorter to left, longer to the right. Decay: Controls the length of the reverb decay. Longer clockwise, shorter counter clockwise. Atmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb. More atmosphere clockwise, less counter clockwise. Mix: This controls how much wet signal is blended in with the dry. More reverb clockwise, less counter clockwise. Tone: This is an input bandwidth control for the reverberated signal. All the way counter clockwise reduces all low end content to make a brighter reverb, turning counter clockwise allows more low end to pass through resulting in a fuller reverberated tone. The Levitation Reverb is True Bypass. Input impedance: 1M Output impedance: >1K Measures 4 5/8? x 2 1/2? x 2.25? with knobs Power Our pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 50 mA.
Preis: 223.00 € | Versand*: 0.00 € -
Earthquaker Devices Hoof Fuzz
Hoof Fuzz Der Hoof ist ein einfach zu bedienendes Gerät, das in der Lage ist, Geräusche von warmen, erdigen Overdrive bis hin zu einem tragenden F uzz zu erzeugen . Es ist ein Germanium / Silizium- Hybrid- Muff Fuzz- Stil (basierend auf dem alten grünen russischen Muff ). Es verfügt über eine strafferen , sauberen Klang als die meisten der aktuellen Muffs . Hoof Fuzz The Hoof is a no-fuss, easy to use device capable of sounds from warm, gritty overdrive to a huge sustaining fuzz. It's a germanium/silicon hybrid muff style fuzz (based on the old green russian muff) with massive amounts of volume on tap and smooth amp-like sustain. It has a tighter, cleaner sound than most muff's which makes it more cutting and discernible in a band setting. The shift control changes the frequency response of the tone control, mainly on the treble side (but takes out the mud on the bass side). Clockwise scoops the mids and counterclockwise enhances the mids. When the shift control is set dead center it has roughly the same frequency response as the original 3 knob hoof (almost flat) . * There is no audible difference between the hoof pictured and the previous gold box version. The circuit is EXACTLY the same. Measures 4 5/8 x 2 1/2" x 2.25" with knobs Power 9v Battery or any standard 9 volt DC power supply with a negative center 2.1mm barrel. Controls: Fuzz Tone Level Shift (mids) "
Preis: 199.00 € | Versand*: 0.00 €
-
Ist es schwer, "The Infernal Devices" auf Englisch zu lesen?
Es hängt von deinem Sprachniveau ab. Wenn du bereits fortgeschritten in Englisch bist, sollte es nicht allzu schwer sein, "The Infernal Devices" zu lesen. Die Sprache ist relativ zugänglich und die Geschichte ist fesselnd, was das Lesen erleichtert. Es könnte jedoch einige unbekannte Vokabeln oder komplexe Sätze geben, die dich herausfordern könnten.
-
Sollte man zuerst The Mortal Instruments oder The Infernal Devices lesen?
Es wird empfohlen, zuerst The Mortal Instruments zu lesen, da diese Reihe chronologisch vor The Infernal Devices spielt. Durch das Lesen von The Mortal Instruments erhält man einen besseren Einblick in die Welt der Schattenjäger und die Hintergrundgeschichte, die in The Infernal Devices weiter vertieft wird. Außerdem gibt es in The Mortal Instruments einige Verweise und Verbindungen zu The Infernal Devices, die man besser versteht, wenn man sie zuerst liest.
-
Wie lautet die Internetadresse von URL?
Wie lautet die Internetadresse von URL? Diese Frage ist etwas irreführend, da URL selbst eine Abkürzung für "Uniform Resource Locator" ist und eine Internetadresse darstellt. Eine Internetadresse kann in Form einer URL angegeben werden, um auf eine bestimmte Webseite oder Ressource im Internet zuzugreifen. Eine URL besteht in der Regel aus einem Protokoll (z.B. http:// oder https://), dem Domainnamen (z.B. www.beispiel.com) und optional einem Pfad zur spezifischen Ressource (z.B. /seite1.html). Somit ist die Internetadresse von URL im Grunde genommen die URL selbst, die die genaue Position einer Ressource im Internet angibt.
-
Kannst du den Link kürzen?
Ja, ich kann den Link kürzen. Bitte gib mir den Link und ich werde ihn für dich kürzen.
Ähnliche Suchbegriffe für Devices:
-
Krozz Devices Chimera Overdrive Pedal
Krozz Devices Chimera Overdrive Pedal Chimera is our version of the legendary klon", the most iconic overdrive of the '90s that remains a phenomenon to this day. It is a lowgain overdrive with clipping made by germanium diodes, which makes its sound "soft" and pleasant. The Chimera has a change in its tonestack, in order to allow more mid-bass than its predecessor. Controls: • Gain • Tone • Output "
Preis: 239.00 € | Versand*: 0.00 € -
Earthquaker Devices Rainbow Machine V2
Rainbow Machine Polyphonic Pitch Shifting/Harmonizing/Alien Aliasing Modulation Generator Willkommen auf der Regenbogen- Machine ! Dieses Teil ist etwas für Experimentatoren, Abenteurer und Krachmacher. Absolut nichts für Puristen und / oder Tonfetischisten , es gibt keine natürlichen Klänge " , die sich aus dieser Box kommen werden. Der Klang ist ganz anders als die meisten modernen Pitch-Shifting Geräte . Die Tonhöhe kann durch ein externes Expression-Pedal für extra Spaß gesteuert werden! The Rainbow Maschine kann auf Bass, Keys , Vocals oder was immer Sie oben träumen können, verwendet werden! Welcome to the Rainbow Machine, in all it’s synthetic glory! This one is for experimenters, adventurists and noisemakers. Totally not for purists and/or tone hounds, there are no “natural sounds” that will come from this box. It takes modern DSP and uses it as a tool of future past to create real time pitch shifting using digital oscillators. The sound is much different than most modern day pitch shifting devices. It was imagineered to be wild and out of control and slightly imperfect while still tracking up and down the guitar neck without glitching out. A cold digital beast made to pretend it has feelings. It will do basic polyphonic harmonies from a 4th down through a 3rd up and every atonal pitch in between. You may add in an accompanying octave to the harmony by bringing up the Secondary function control. You can take it way beyond and open up your third eye by bringing in the Magic. The Magic is the heart of the Rainbow Machine. In conjunction with the Tracking control, the Magic creates wild pitch take offs and descend’s, chaos chorusing, shrieks, pixie trails and wealth of other general mayhem inducing noises. The pitch can be controled by an external expression pedal for extra fun! The Rainbow Machine can be used on bass, keys, vocals or anything else you can dream up! Power A standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option. Expression Pedal We recommend the Moog Expression pedal for the Rainbow Machine and can not gaurantee that any others will work. "
Preis: 259.00 € | Versand*: 0.00 € -
EarthQuaker Devices Afterneath Reverb V3
Ungewöhnliches Digitalreverb mit vielen Klangmöglichkeiten. Der Bodeneffekt arbeitet mit einer Vielzahl kurzer Predelays, die zusammen mit dem Hallprozessor verrückte Sounds erzeugen können, die von diffusen Höhlenhallräumen über kurze rhythmische Shatterdelays bis hin zu atmosphärischen Klangteppichen reichen. Features Reverb Pedal Regler für Length, Diffuse, Dampen, Drag, Reflect und Mix Sounds von Ambient bis zur Selbst-Oszillation Ein-und Ausgang 6,3 mm Mono-Klinken True Bypass Status LED Metallgehäuse Stromversorgung via optionalem 9V Netzteil 2,1 mm x 5,5 mm Hohlstecker, Polarität (-) innen Abmessungen (L x B x H): 117 x 63 x 57 mm Stromverbrauch 65 mA Hand-made in USA he Afterneath is an otherworldly reverberation machine that uses a swarm of short delays to create wild and cavernous reverbs and scattered, short rhythmic delays with bizarre characteristics. The reverb created is beyond massive and goes well beyond the territory of most reverb pedals. The controls allow you to stretch, smudge, swell and even self-oscillate into messy ambient washes of sound. The Length control adjusts the decay of the reverb; anything from shorter hall through endless plate style reverbs can be achieved. The Reflect knob controls the regeneration, basically feeding the output back through to create an even deeper otherworldly dreamscape. The Drag control lets you pull the reverb through time by slowing down or speeding up the reverb. The Diffuse knob adds control over spread of the reverb ranging from identifiable attack to a wash of smooth reverb. The Dampen control adjusts the tone of the reverb, both stinging bright tones and warmer swell. The end result is an ethereal, ambient wash that goes from hall to an infinite glitched-out orchestra pit warming up in a canyon at the bottom of another canyon inside a well. The Afterneath is true bypass with an all digital reverb engine, all analog dry signal path and hand made one at a time by real living human beans in dimly lit Akron, Ohio. Controls Length: Controls the decay length of the reverb. Diffuse: Adjusts the spread of the reverb. Sharper with more attack counter clockwise, more ambient and washy as you turn it clockwise. Dampen: Clockwise for brighter tones, counter clockwise for darker tones. Drag: This digital reverb is made up of a bunch of short delays, this separates the delay lines creating a stuttering, pingy effect. This is the coolest control on the Afterneath, we highly advise slowly turning this while you let notes ring out for a cool warped speed effect. More delay as you turn it counter clockwise, more reverb as you turn it clockwise. Reflect: Controls the regeneration of the reverb, turn clockwise for more wash and echos, counterclockwise for less. This will self oscillate if turned up high. Mix: Blends the wet signal into the dry. Though it does not actually go full wet, it will gradually lower the clean level as you turn it clockwise and give the appearance of full wet. Measures 4 5/8? x 2 1/2? x 2.25? with knobs Power Our pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 65 mA.
Preis: 233.00 € | Versand*: 0.00 € -
Krozz Devices Airborn Analog Flanger
Krozz Devices AIRBORN ANALOG FLANGER Airborn is a flanger that will take you on a psychedelic journey on a fully analog circuit. Through a BBD (Bucket-Brigade Device), our pedal allows you to recreate iconic flanger tones that marked the history of music, ranging from the “acid” and “liquid” sounds of Gilmour to the famous “jet plane” sounds of EVH , also enabling eccentric timbres when in negative feedback mode. Our flanger features a Panasonic/Matsushita MN3207 NOS chips. CONTROLS • Level: Controls the effect volume. In addition to avoiding the volume loss characteristic of this circuit topology, Airborn's volume control can even go above unity gain and boost your signal. • Range: Selects the extension of the frequency band through which the modulation will travel. At lower settings you will have a smaller range and more traditional tones. Clockwise the sweep is larger and the effect becomes deeper. • Rate: Determines how fast the frequency range will be swept (set by the “Range” control). Clockwise the oscilation will be faster, counter-clockwise it will be slower and more “jet-plane-like”. • Feedback: Controls the amount of feedback of the effect. The higher the knob, the more intense the effect will be, tending to self-oscillate when close to maximum. • Oxidation: It is a frequency filter that acts only on the modulated signal and interacts with the “Feedback”. With the knob open, the sound is more strident, characteristic of conventional flangers, while counter-clockwise the high frequencies of the modulated signal are cut and the effect becomes more subtle. • “+/-”: Selects between positive feedback (+) or negative feedback (-). • Filter-Flanger: Inside the pedal there is a small switch that locks (left) and unlocks (right) the oscillator. With the oscillator locked, the filter becomes static and the frequency range where it will act is selected by the position of the “Range” knob. SPECIFICATIONS Input impedance 1MΩ Output impedance < 1kΩ Current draw 15mA Power supply 9V DC (negative center) Dimensions 4.72 x 3.15" x 2.75" Weight 1 lbs "
Preis: 269.00 € | Versand*: 0.00 €
-
Wie erstelle ich ein URL Link?
Um einen URL-Link zu erstellen, musst du zuerst die vollständige Webadresse eingeben, die du verlinken möchtest. Dann markiere den Text oder das Bild, das du als Link verwenden möchtest. Klicke auf den Link-Button in deinem Texteditor und füge die Webadresse ein. Alternativ kannst du auch die Tastenkombination Strg + K verwenden, um einen Link einzufügen. Vergiss nicht, den Link zu testen, um sicherzustellen, dass er richtig funktioniert.
-
Wie kann man in TypeScript eine URL-Weiterleitung implementieren?
In TypeScript kann man eine URL-Weiterleitung implementieren, indem man die `window.location.href` Eigenschaft auf die gewünschte URL setzt. Zum Beispiel: ```typescript window.location.href = "https://www.example.com"; ``` Diese Zeile leitet den Benutzer zur angegebenen URL weiter.
-
Was bedeutet Link teilen?
Was bedeutet Link teilen? Beim Teilen eines Links handelt es sich um die Weitergabe einer Webadresse an andere Personen, damit sie auf die gleiche Webseite zugreifen können. Dies kann über verschiedene Kommunikationswege wie E-Mail, soziale Medien oder Messenger erfolgen. Durch das Teilen eines Links können Nutzer Inhalte, Informationen oder Produkte mit anderen teilen und verbreiten. Es ist eine einfache Möglichkeit, interessante Webseiten oder Ressourcen mit anderen zu teilen und sie auf relevante Inhalte aufmerksam zu machen. Letztendlich ermöglicht das Teilen von Links eine effektive Verbreitung von Informationen im Internet.
-
Wie kann man eine URL mit JavaScript kürzen?
Um eine URL mit JavaScript zu kürzen, kannst du die `URL`-Klasse verwenden, um die ursprüngliche URL zu analysieren und dann die gewünschten Teile extrahieren. Du kannst beispielsweise die `hostname`-Eigenschaft verwenden, um nur den Hostnamen anzuzeigen, oder die `pathname`-Eigenschaft, um nur den Pfad anzuzeigen. Du kannst auch die `replace()`-Methode verwenden, um bestimmte Teile der URL zu entfernen oder zu ersetzen.
* Alle Preise verstehen sich inklusive der gesetzlichen Mehrwertsteuer und ggf. zuzüglich Versandkosten. Die Angebotsinformationen basieren auf den Angaben des jeweiligen Shops und werden über automatisierte Prozesse aktualisiert. Eine Aktualisierung in Echtzeit findet nicht statt, so dass es im Einzelfall zu Abweichungen kommen kann.